Topics tagged stepper

Topic	Replies	Views	Activity
SimpleFOC stepstick developement bldc , stepper , stm32	61	2168	February 23, 2026
Can a single STM32 run two stepper motors at the same time? (custom robotics mainboard, STM32G431) hardware support stm32g431 , stm32 , stepper	7	197	November 30, 2025
Stepper cogging in open-loop and sensor issues (AS5600 magnet confirmed to be correct) stepper , esp32 , as5600	12	248	October 31, 2025
Low side current sensing for stepper motors developement stepper-current-sens , current_sensing , foc-current , stepper	39	813	July 8, 2025
Stepper motor acting weird hardware support stepper	3	270	May 25, 2025
Stepper Motor not moving to target position developement raspberry_pi_pico , l298n , stepper	2	86	April 26, 2025
Controlling a Stepper Motor using two IBT-2 Half-Bridge DC motor drivers hardware support arduino_uno , stepper	15	2414	March 25, 2025
Driving two-phase (bilpolar) steppers with three-phase (BLDC) driver - Hybrid stepper motor tips-n-tutorials stepper , bldc , discussion	40	1904	March 12, 2025
Highly configurable 8 Axis SimpleFOC stepper board for CNC and 3D Printing applications community projects stepper	2	415	December 31, 2024
Drivers and encoders for controlling Nema 17 and Nema 23 (4.2A) step motors hardware support esp32 , arduino_uno , stepper	1	223	November 26, 2024
Torque Control Using DC Current: Development Issues with Motor Movement developement torque_control , stepper , stm32	0	108	October 19, 2024
SimpleFOC using LC86H2160 stepper with DM860H on STM32F103C8T6, for open-source injection machine hardware support stepper-current-sens , stepper , stm32	9	286	October 13, 2024
STM32 AMT 103-V closed loop issue hardware support amt-103 , stm32 , stepper	1	133	September 10, 2024
Help choosing the right hardware for stepper torque control hardware support stepper-current-sens , torque_control , stepper	0	124	July 28, 2024
Arduino uno r4 + two simplefoc mini + bipolar stepper => drivers melting hot within seconds hardware support stepper , simplefocmini , arduino_uno	2	223	July 18, 2024
Help with FOC of NEMA 17 Stepper Motor with as5600, L298N, and Arduino Mega 2560 hardware support l298n , as5600 , arduino_mega2560 , stepper	10	2045	May 24, 2024
IMU+ velocity/position control CL developement esp32 , stepper , imu , gyro	7	429	April 11, 2024
Magnetic Sensor - Measurements hardware support magnetic-sensor , stepper , as5600	3	540	April 11, 2024
Problems with OpenLoop hardware support stepper , stm32	3	260	February 29, 2024
AS5600 i2C: Incorrect angle readings as5600 , stepper	6	1064	December 12, 2023
Stepper motor haptic connection hardware support esp32 , stepper , as5600	1	553	December 9, 2023
FOC Calibration Not Running hardware support as5048 , esp32 , l298n , stepper	3	553	November 23, 2023
Labeling Machine applications arduino_uno , stepper , teensy , as5600	5	545	September 24, 2023
Stepper Motor Closed Loop issue hardware support stm32 , l298n , stepper	19	1584	April 20, 2023
Stepper motor and current sense current_sensing , stepper	3	809	April 6, 2023
Advice for Creating Basic Smart Stepper Hardware applications rp2040 , stepper	3	472	April 5, 2023
Stepper motor setup hardware support stepper	7	1507	December 30, 2022
NEMA23 CNC FOC Stepper Driver Dev developement stepper	66	3028	December 21, 2022
I'm going to give up on Stepper motors stepper , l298n , teensy , as5048a	17	1625	September 30, 2022
Getting closed loop working on stepper esp32 , stepper , tle5012b	2	941	September 22, 2022