foc
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
Motor moving pole to pole in openloop control
|
|
7 | 107 | August 19, 2025 |
|
Controller options for 5010 360KV motors
|
|
1 | 284 | August 6, 2025 |
|
How to learn FOC in C?
|
|
1 | 249 | July 13, 2025 |
| The motor reverses direction when holding the torque. |
|
0 | 52 | July 9, 2025 |
| Position Loop High Response Speed Problem |
|
3 | 173 | January 18, 2025 |
| Accuracy limit for FOC |
|
5 | 342 | January 15, 2025 |
| FD6288 problems |
|
1 | 197 | January 15, 2025 |
| FOC Limited Speed reaching problem |
|
5 | 418 | October 23, 2024 |
| Incorrect calculating BLCD motor alignment procedure |
|
1 | 161 | September 19, 2024 |
|
Position controll with Hall encoders only
|
|
2 | 237 | August 29, 2024 |
| Avoid start up sequence and estimate rotor angle on system start up |
|
10 | 426 | August 20, 2024 |
| Motor.disable() not functioning well with InlineCurrentSense() in foc_current |
|
9 | 622 | March 28, 2024 |
| Impact of Open loop ram startup? |
|
3 | 431 | March 7, 2024 |
| A confusion about the FOC algorithm |
|
9 | 634 | June 12, 2023 |