I want to control the electromagnetic torque of 200W, 200 rpm permanent magnet generator using field oriented control.What is recommended drive that I can use?
Hi,
there is a lengthy thread about regen breaking. Currently simpleFOC doesn’t support generators directly and I don’t know of any regen-braking controller running simpleFOC.
I’d use an ebike controller with (adjustable) regen braking.
I had a good contact in the past. With his controllers I could modify many parameters. Like cutoff voltage, max current a.s.o.
He (Lyen) was busy on the endless sphere forum. But I haven’t been there for 10 years…