Control a BLDC motor (3 Hall sensor) with a Joystick

[JorgeMaker]

@Jekylleur

IFX007T

SimpleFOC mainly depends on the MCU in which you run it. I assume that you are using a board like this one or similar.

If this is the case as far as you get running SimpleFOC in your MCU it will work. If your board has an integrated MCU I can not tell you.

Here you have, as example, a custom board to run SimpleFOC board using IFX007T, so IFX007T are perfectly suitable.

My IFX007T driver board

Hi, a few weeks ago I made a driver board based on the IFX007T. Here’s a quick video of me taking it for a spin: [BLDC Driver with Position Sensor] (this is just with a 2A 12v power supply) Here is the schematic, PCB and 3d model for the test mount: And this is the project that I’ve flashed to the board: https://github.com/jkirsons/BLDC-Driver-IFX007T Note: I’m not an electrical engineer (I’m a software developer) - this was just put together from datasheets. This is my first…

Regards !!