If you look for the right wire housings here is what AI told me:
The exact official counterparts for the JST SH series 6-pin right-angle SMT header (SM06B-SRSS-TB(LF)(SN), 1.0mm pitch) depend on whether you prefer standard crimp housings or IDC (Insulation-Displacement Connector) terminations.
Here are the official parts from JST:
1. Crimp Housing (Standard)
If you want to crimp the wires individually:
-
Housing Part Number: SHR-06V-S or SHR-06V-S-B (6-position female housing)
-
Matching Crimp Contacts (ordered separately):
SSH-003T-P0.2 (for wire sizes 32 to 28 AWG)
2. IDC Housing (Pre-loaded / Insulation-Displacement)
If you want to press the connector directly onto a wire bundle without crimping individual pins:
- Housing Part Number: 06SR-3S (suitable for 30 AWG wire)
There are three different connectors of the same family (1x 6-pin, 1x 5-pin 2x 3-pin). Keep that in mind, when ordering.