Tried to just test the example sketch of the as5600 in the utils folder but i’m not getting any response from the serial montior but the code is uploaded . I’ll say what are the things i’ve done
1.Opened a new b-g431-esc out of the cover connected the i2C wire as per the given photo below
2. opened the platformio and created a new project with discovery b-g431-esc1 as per @Owen_Williams tutorial selected and added the neccessary build flags and libdeps in the platformio file .
3.opened a example as5600 and uploaded it uploaded sucessfully but i’m not reading anything from the searial monitor it is just empty(Also a big right red led is always on)
i’m just a newbie, Please anybody help any kind of help or suggestion would be appreciated