# \#open-loop

**URL:** https://community.simplefoc.com/tag/open-loop/10.md

[Latest](https://community.simplefoc.com/latest.md) · [Categories](https://community.simplefoc.com/categories.md) · [Tags](https://community.simplefoc.com/tags.md)

---

## [setPhaseVoltage() works, but open-loop outputs 0V - pico2&Simple Foc mini](https://community.simplefoc.com/t/setphasevoltage-works-but-open-loop-outputs-0v-pico2-simple-foc-mini/8148)

<div class="topic-metadata">

**Author:** [@chanmin723](https://community.simplefoc.com/u/chanmin723)\
**Replies:** 3\
**Last updated:** [May 29, 2026, 7:12am UTC](https://community.simplefoc.com/t/setphasevoltage-works-but-open-loop-outputs-0v-pico2-simple-foc-mini/8148 "2026-05-29T07:12:49Z")

</div>

Hi everyone, I am working on a project using a Raspberry Pi Pico2 and a SimpleFOC Mini board to drive a 2805 140KV Gimbal Motor. I have a strange issue where open-loop control fails completely, even though manual volta…

---

## [Custom PCB doesn't move the motor](https://community.simplefoc.com/t/custom-pcb-doesnt-move-the-motor/7118)

<div class="topic-metadata">

**Author:** [@Jose\_Aldahir\_Espinos](https://community.simplefoc.com/u/Jose_Aldahir_Espinos)\
**Replies:** 37\
**Last updated:** [May 9, 2025, 6:43pm UTC](https://community.simplefoc.com/t/custom-pcb-doesnt-move-the-motor/7118 "2025-05-09T18:43:49Z")

</div>

Hi, I make mi own PCB with atmega328pb, as5600 and L6234D. I tried to make a BLDC tester. When I try the angle read with the as5600 it’s all perfect, the as5600 reads the angle well. But when I try with codes that sup…

---

## [Ticking on ESP32 but not ATMEGA2560](https://community.simplefoc.com/t/ticking-on-esp32-but-not-atmega2560/5388)

<div class="topic-metadata">

**Author:** [@Rosewill2](https://community.simplefoc.com/u/Rosewill2)\
**Replies:** 18\
**Last updated:** [September 21, 2024, 10:17am UTC](https://community.simplefoc.com/t/ticking-on-esp32-but-not-atmega2560/5388 "2024-09-21T10:17:14Z")

</div>

Hi All I have been working with SimpleFOC for a while now to develop a custom PCB motor. After a few iterations I’m getting closer to what I want but ran into an issue that I have been struggling with. I have the follow…

---

## [IHM07M1 PWM being generated but motor not moving](https://community.simplefoc.com/t/ihm07m1-pwm-being-generated-but-motor-not-moving/5187)

<div class="topic-metadata">

**Author:** [@faelern](https://community.simplefoc.com/u/faelern)\
**Replies:** 3\
**Last updated:** [July 15, 2024, 8:33am UTC](https://community.simplefoc.com/t/ihm07m1-pwm-being-generated-but-motor-not-moving/5187 "2024-07-15T08:33:53Z")

</div>

Hi, I’m trying to setup IHM07M1 driver with small BLDC motor. I’m using 3PWM driver class with both PWM and ENABLE pins provided, open loop velocity control and no sensor. With oscilloscope I can see valid 12V PWM signal…

---

## [B-G431-ESC open loop velocity control error](https://community.simplefoc.com/t/b-g431-esc-open-loop-velocity-control-error/4690)

<div class="topic-metadata">

**Author:** [@Jeoungji](https://community.simplefoc.com/u/Jeoungji)\
**Replies:** 12\
**Last updated:** [March 27, 2024, 4:21pm UTC](https://community.simplefoc.com/t/b-g431-esc-open-loop-velocity-control-error/4690 "2024-03-27T16:21:49Z")

</div>

I used B-G431B-ESC1 with 5010 360Kv motor in PlatformIO. I went to try that control Open Loop Velocity, but the motor keeps turning, stopping, and going back and forth again. I checked the CCR register value, and the C…

---

## [Impact of Open loop ram startup?](https://community.simplefoc.com/t/impact-of-open-loop-ram-startup/4597)

<div class="topic-metadata">

**Author:** [@yshklas](https://community.simplefoc.com/u/yshklas)\
**Replies:** 3\
**Last updated:** [March 7, 2024, 9:50pm UTC](https://community.simplefoc.com/t/impact-of-open-loop-ram-startup/4597 "2024-03-07T21:50:30Z")

</div>

Hello All, I am new to Motor control of BLDC/PMSM and FOC control. My understanding so far is that for startup, we initially provide high RPM (Open loop Ramp), which will make motor consume more current, makes motor phy…

---

## [Open-Loop Velocity Control Stuttering](https://community.simplefoc.com/t/open-loop-velocity-control-stuttering/2695)

<div class="topic-metadata">

**Author:** [@TReasoner](https://community.simplefoc.com/u/TReasoner)\
**Replies:** 10\
**Last updated:** [December 26, 2023, 11:45am UTC](https://community.simplefoc.com/t/open-loop-velocity-control-stuttering/2695 "2023-12-26T11:45:07Z")

</div>

When using an open-loop velocity control with a constant target velocity (with the example code), the motor doesn’t move smoothly and instead jumps in large steps. Any idea what could be causing this issue? I am using a …

---

## [Open Loop Velocity Example Not Working (SimpleFOCMini & Nucleo F446RE)](https://community.simplefoc.com/t/open-loop-velocity-example-not-working-simplefocmini-nucleo-f446re/3296)

<div class="topic-metadata">

**Author:** [@woe](https://community.simplefoc.com/u/woe)\
**Replies:** 35\
**Last updated:** [May 5, 2023, 3:20pm UTC](https://community.simplefoc.com/t/open-loop-velocity-example-not-working-simplefocmini-nucleo-f446re/3296 "2023-05-05T15:20:50Z")

</div>

Hello, first time poster, hope im in the right category. Im using a Nucleo-F446RE w the SimpleFOCMini driver to drive a GM4108H-120T gimbal motor, or trying to anyway. Its not working, nothing happens. The code im runn…

---

## [STM32 - open loop test - Driver init failed](https://community.simplefoc.com/t/stm32-open-loop-test-driver-init-failed/2733)

<div class="topic-metadata">

**Author:** [@Lambert14](https://community.simplefoc.com/u/Lambert14)\
**Replies:** 3\
**Last updated:** [December 3, 2022, 7:22pm UTC](https://community.simplefoc.com/t/stm32-open-loop-test-driver-init-failed/2733 "2022-12-03T19:22:19Z")

</div>

Hello everybody! I am developing my own bldc motor controller. Sadly i’ve ran into problems with my microcontroller. I am trying to program an STM32L432kc nucleo32 microcontroller using Arduino IDE. There are 2 major pro…

---

## [Openloop angle mode, motor turns further than expected](https://community.simplefoc.com/t/openloop-angle-mode-motor-turns-further-than-expected/2667)

<div class="topic-metadata">

**Author:** [@Grizzly](https://community.simplefoc.com/u/Grizzly)\
**Replies:** 41\
**Last updated:** [November 28, 2022, 1:41pm UTC](https://community.simplefoc.com/t/openloop-angle-mode-motor-turns-further-than-expected/2667 "2022-11-28T13:41:27Z")

</div>

Hi, maybe I misunderstand something, but I thought, if I repeatedly call motor.setPhaseVoltage(U, 0, Angle) with small, increasing values from 0.0 to 6.28 \*polepairs, for Angle, the motor should turn exactly 360 degrees…
