# Vesc4.20+ac servo 1.3kw

**URL:** <https://community.simplefoc.com/t/vesc4-20-ac-servo-1-3kw/930>\
**Category:** Uncategorized\
**Created:** [May 27, 2021, 6:32am UTC](https://community.simplefoc.com/t/vesc4-20-ac-servo-1-3kw/930 "2021-05-27T06:32:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![AdilRepas97](https://community.simplefoc.com/user_avatar/community.simplefoc.com/adilrepas97/32/939_2.png) [@AdilRepas97](https://community.simplefoc.com/u/AdilRepas97)\
**Post date:** [May 27, 2021, 6:32am UTC](https://community.simplefoc.com/t/vesc4-20-ac-servo-1-3kw/930/1 "2021-05-27T06:32:09Z")

</div>

my direct drive wheel project with vesc4.20

AC SERVO Yaswakawa 1.3kw  
48v 15A power supply  
and braking resistor 8ohm 50W

next I will try to install simplefoc on vesc

PID test

[![](https://img.youtube.com/vi/EFtG06Az6Ro/hqdefault.jpg "diy direct drive steering wheel") ](https://www.youtube.com/watch?v=EFtG06Az6Ro)
