# The microspora Arduino thread

**URL:** https://community.simplefoc.com/t/the-microspora-arduino-thread/8345
**Category:** hardware support
**Tags:** microspora
**Created:** [September 26, 2026, 7:59am UTC](https://community.simplefoc.com/t/the-microspora-arduino-thread/8345 "2026-09-26T07:59:44Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![o\_lampe](https://community.simplefoc.com/letter_avatar_proxy/v4/letter/o/85e7bf/32.png) [@o\_lampe](https://community.simplefoc.com/u/o_lampe)
#### Post date: [October 7, 2026, 11:58am UTC](https://community.simplefoc.com/t/the-microspora-arduino-thread/8345/2 "2026-10-07T11:58:28Z")

</div>

If you look for the right wire housings here is what AI told me:

> The exact official counterparts for the **JST SH series** 6-pin right-angle SMT header (**SM06B-SRSS-TB(LF)(SN)**, 1.0mm pitch) depend on whether you prefer standard crimp housings or IDC (Insulation-Displacement Connector) terminations.

Here are the official parts from JST:

**1. Crimp Housing (Standard)**

If you want to crimp the wires individually:

- **Housing Part Number:**  **SHR-06V-S** or **SHR-06V-S-B** (6-position female housing)

- **Matching Crimp Contacts (ordered separately):**

**2. IDC Housing (Pre-loaded / Insulation-Displacement)**

If you want to press the connector directly onto a wire bundle without crimping individual pins:

- **Housing Part Number:**  **06SR-3S** (suitable for 30 AWG wire)

There are three different connectors of the same family (1x 6-pin, 1x 5-pin 2x 3-pin). Keep that in mind, when ordering.

---

_[View the full topic](https://community.simplefoc.com/t/the-microspora-arduino-thread/8345)._