# Support for esp32 c3

**URL:** https://community.simplefoc.com/t/support-for-esp32-c3/1531
**Category:** hardware support
**Created:** [January 2, 2022, 4:44pm UTC](https://community.simplefoc.com/t/support-for-esp32-c3/1531 "2022-01-02T16:44:02Z")
**Posts on this page:** 1
**Showing post:** 18

<div class="post-metadata">

### Author: ![loudboy](https://community.simplefoc.com/letter_avatar_proxy/v4/letter/l/41988e/32.png) [@loudboy](https://community.simplefoc.com/u/loudboy)
#### Post date: [October 29, 2025, 9:41am UTC](https://community.simplefoc.com/t/support-for-esp32-c3/1531/18 "2025-10-29T09:41:45Z")

</div>

> [@runger](#):
>
> ESP32-Pico-D4

Hi @runger , and thank you for your replies. I am trying to use the examples that come with the simpleFOC library, with no modification other than to address my pins and set the pole pair value. See here [Stepper cogging in open-loop and sensor issues (AS5600 magnet confirmed to be correct) - #2 by dekutree64](https://community.simplefoc.com/t/stepper-cogging-in-open-loop-and-sensor-issues-as5600-magnet-confirmed-to-be-correct/7720/2)

No error message is being printed to the monitor.

This is the C3 variant I am using

> **[Getting Started with Seeed Studio XIAO ESP32C3 | Seeed Studio Wiki](https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/)**
>
> Getting Started with Seeed Studio XIAO ESP32C3

---

_[View the full topic](https://community.simplefoc.com/t/support-for-esp32-c3/1531)._