# Support for esp32 c3

**URL:** https://community.simplefoc.com/t/support-for-esp32-c3/1531
**Category:** hardware support
**Created:** [January 2, 2022, 4:44pm UTC](https://community.simplefoc.com/t/support-for-esp32-c3/1531 "2022-01-02T16:44:02Z")
**Posts on this page:** 1
**Showing post:** 14

<div class="post-metadata">

### Author: ![loudboy](https://community.simplefoc.com/letter_avatar_proxy/v4/letter/l/41988e/32.png) [@loudboy](https://community.simplefoc.com/u/loudboy)
#### Post date: [October 26, 2025, 10:20am UTC](https://community.simplefoc.com/t/support-for-esp32-c3/1531/14 "2025-10-26T10:20:03Z")

</div>

Hi again Antun,

I am experiencing some strange behavior with my setup, which I haven’t been able to find similar problems mentioned. The controller disconnects from serial after a while and doesn’t behave as expected when running the example sketches. Maybe this is more ESP32C3-specific oddities?

I’ve detailed my situation here: [Stepper cogging in open-loop and sensor issues (AS5600 magnet confirmed to be correct) - #2 by dekutree64](https://community.simplefoc.com/t/stepper-cogging-in-open-loop-and-sensor-issues-as5600-magnet-confirmed-to-be-correct/7720/2)

---

_[View the full topic](https://community.simplefoc.com/t/support-for-esp32-c3/1531)._