# STspin32G4 support

**URL:** <https://community.simplefoc.com/t/stspin32g4-support/2027>\
**Category:** hardware support\
**Created:** [May 9, 2022, 1:42pm UTC](https://community.simplefoc.com/t/stspin32g4-support/2027 "2022-05-09T13:42:54Z")\
**Posts on this page:** 1\
**Showing post:** 84

<div class="post-metadata">

**Author:** ![Juan-Antonio\_Soren\_E](https://community.simplefoc.com/user_avatar/community.simplefoc.com/juan-antonio_soren_e/32/9969_2.png) [@Juan-Antonio\_Soren\_E](https://community.simplefoc.com/u/Juan-Antonio_Soren_E)\
**Post date:** [February 8, 2023, 2:22pm UTC](https://community.simplefoc.com/t/stspin32g4-support/2027/84 "2023-02-08T14:22:50Z")

</div>

Now the POGO´s are 4pin style, like its customary. 3.3V, DIO, CLK, GND in that order. SWO and NRST can be connected if needed for some reason, like debugging.

Ive included the RX/TX pins, although I am not entirely sure how to use them. Seeing they are on pins 13/14 on the 14pin 1.27mm pitch ST-link connector, it would be foolish not to integrate them I agree @runger

 ![POGO SWD Adabtor w RXTX](https://community.simplefoc.com/uploads/default/original/2X/a/a219bf9a681b8438381f1f997dbac25999d4bde8.jpeg)

---

_[View the full topic](https://community.simplefoc.com/t/stspin32g4-support/2027)._