# Steer by wire / force feedback - movement speed high

**URL:** <https://community.simplefoc.com/t/steer-by-wire-force-feedback-movement-speed-high/3686>\
**Category:** developement\
**Created:** [August 2, 2023, 12:13pm UTC](https://community.simplefoc.com/t/steer-by-wire-force-feedback-movement-speed-high/3686 "2023-08-02T12:13:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![berti](https://community.simplefoc.com/user_avatar/community.simplefoc.com/berti/32/5241_2.png) [@berti](https://community.simplefoc.com/u/berti)\
**Post date:** [August 2, 2023, 12:13pm UTC](https://community.simplefoc.com/t/steer-by-wire-force-feedback-movement-speed-high/3686/1 "2023-08-02T12:13:16Z")

</div>

Hi… tried to implement a simple force feedback controller.  
therefore i took the steer by wire haptics example and modified it.

Changed the motor move command to this principal example:

motor.move( force \* ( center - motor1.shaft\_angle));

Full source here:

> <https://gitlab.com/helisim/forcefeedback/-/blob/main/teensy4.0/one_axis.ino>

Movement of the motor to its center position is always very fast. How can i slow it down without loosing the force on the axis?
