# SIMPLEFOC MINI (my version) - 3/3 available

**URL:** https://community.simplefoc.com/t/simplefoc-mini-my-version-3-3-available/7612
**Category:** giveaway
**Created:** [August 27, 2025, 12:04pm UTC](https://community.simplefoc.com/t/simplefoc-mini-my-version-3-3-available/7612 "2025-08-27T12:04:10Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![gimbal\_pete](https://community.simplefoc.com/letter_avatar_proxy/v4/letter/g/ecccb3/32.png) [@gimbal\_pete](https://community.simplefoc.com/u/gimbal_pete)
#### Post date: [September 2, 2025, 4:27pm UTC](https://community.simplefoc.com/t/simplefoc-mini-my-version-3-3-available/7612/2 "2025-09-02T16:27:53Z")

</div>

How come you used the DRV8313 and not the DRV8316 as per Anton’s latest revision?

> [@SimpleFOCMini v2.1](https://community.simplefoc.com/t/simplefocmini-v2-1/7113):
>
> Hi guys, I’ve recently done another iteration of the mini board, and I’ve decided to go for the DRV8316 chip this time. As it already has low-side current sensing and a bit better current capacity than DRV8313 or LAN9252 its a great candidate for a minimal starter-kit type of boards. I’ve done a few iterations and the results are pretty good. Here is the comparison to the mini v1.1 Info Mini v2 Mini v1 Driver DRV8316CT - [datasheet](https://www.ti.com/lit/ds/symlink/drv8316.pdf) CT version of the DRV8316 with Hardware co…

---

_[View the full topic](https://community.simplefoc.com/t/simplefoc-mini-my-version-3-3-available/7612)._