# Infineon bldc shields impressions

**URL:** https://community.simplefoc.com/t/infineon-bldc-shields-impressions/417
**Category:** hardware support
**Created:** [January 4, 2021, 3:13pm UTC](https://community.simplefoc.com/t/infineon-bldc-shields-impressions/417 "2021-01-04T15:13:11Z")
**Posts on this page:** 1
**Showing post:** 14

<div class="post-metadata">

### Author: ![feng](https://community.simplefoc.com/user_avatar/community.simplefoc.com/feng/32/392_2.png) [@feng](https://community.simplefoc.com/u/feng)
#### Post date: [January 10, 2021, 6:42am UTC](https://community.simplefoc.com/t/infineon-bldc-shields-impressions/417/14 "2021-01-10T06:42:19Z")

</div>

@Antun_Skuric  
Using btn7960 or btn8982 three half bridge chip to make a simple driver board.Using single chip processor esp32 to brush simplefoc can open-loop control.There’s no test, but it looks good! You can try it!

[Using btn7960 or btn8982 three half bridge chip to make a simple driver board.](https://www.youtube.com/watch?v=RTnTL_MhKVU)

 ![btn](https://community.simplefoc.com/uploads/default/original/1X/b08ff9331831986640a9915a203eacf6a2a7e112.jpeg)

Before I drew 2 Allegro, using 5010 motor, a little hot, current sound is very big, no test! However, the current within 10 a motor should be good!

 ![QQ图片20201221142836](https://community.simplefoc.com/uploads/default/original/1X/d12efa94959b8c0370deb14bf008e991c04b39ce.png) ![QQ图片20201221142845](https://community.simplefoc.com/uploads/default/original/1X/942a2ce58944855dd8b5d0dc2f172f4f37e3cdf2.png)  
 ![QQ图片20201221142541](https://community.simplefoc.com/uploads/default/original/1X/60d0e71801e1d47a2be2b7e7da1d287e5f5e0d50.png) ![QQ图片20201221142554](https://community.simplefoc.com/uploads/default/original/1X/f2af50b3e65878c2b0cbed90ecdfae2dc3209fda.png)

---

_[View the full topic](https://community.simplefoc.com/t/infineon-bldc-shields-impressions/417)._