# IGBT Driver NFAM5065L4BT SimpleFOC board

**URL:** <https://community.simplefoc.com/t/igbt-driver-nfam5065l4bt-simplefoc-board/1087>\
**Category:** hardware support\
**Created:** [August 7, 2021, 5:01pm UTC](https://community.simplefoc.com/t/igbt-driver-nfam5065l4bt-simplefoc-board/1087 "2021-08-07T17:01:56Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Thanos](https://community.simplefoc.com/letter_avatar_proxy/v4/letter/t/c37758/32.png) [@Thanos](https://community.simplefoc.com/u/Thanos)\
**Post date:** [August 8, 2021, 2:00pm UTC](https://community.simplefoc.com/t/igbt-driver-nfam5065l4bt-simplefoc-board/1087/9 "2021-08-08T14:00:48Z")

</div>

Yeah, the shunt resistor is important for the internal circuit to have feedback about the overcurrent cutoff…

 ![IMG_20210808_065857](https://community.simplefoc.com/uploads/default/original/2X/0/01519944bdfda25f318cbeed712960a08f53942d.jpeg)

---

_[View the full topic](https://community.simplefoc.com/t/igbt-driver-nfam5065l4bt-simplefoc-board/1087)._