# AS5600 Angle sensor support?

**URL:** https://community.simplefoc.com/t/as5600-angle-sensor-support/42
**Category:** hardware support
**Tags:** as5600
**Created:** [July 25, 2020, 2:52am UTC](https://community.simplefoc.com/t/as5600-angle-sensor-support/42 "2020-07-25T02:52:54Z")
**Posts on this page:** 1
**Showing post:** 50

<div class="post-metadata">

### Author: ![Juxo](https://community.simplefoc.com/user_avatar/community.simplefoc.com/juxo/32/61_2.png) [@Juxo](https://community.simplefoc.com/u/Juxo)
#### Post date: [October 24, 2020, 3:07pm UTC](https://community.simplefoc.com/t/as5600-angle-sensor-support/42/50 "2020-10-24T15:07:51Z")

</div>

@Adam_Donovan, if you are searching for a frequency analyser, go to the play store and load the app “Specroid”. It is really professional, handy and free. Mic and CODEC of most cell phones are pretty high sophisticated.  
Probably this brings you an idea what causes the noise. If you have stacked metal sheets in your motor I would look on this usual suspect at first.

---

_[View the full topic](https://community.simplefoc.com/t/as5600-angle-sensor-support/42)._