# Angle sensor SPI support / SC60228DC

**URL:** https://community.simplefoc.com/t/angle-sensor-spi-support-sc60228dc/1682
**Category:** hardware support
**Tags:** sc60228
**Created:** [February 7, 2022, 11:21pm UTC](https://community.simplefoc.com/t/angle-sensor-spi-support-sc60228dc/1682 "2022-02-07T23:21:02Z")
**Posts on this page:** 1
**Showing post:** 22

<div class="post-metadata">

### Author: ![runger](https://community.simplefoc.com/user_avatar/community.simplefoc.com/runger/32/395_2.png) [@runger](https://community.simplefoc.com/u/runger)
#### Post date: [February 15, 2022, 9:33pm UTC](https://community.simplefoc.com/t/angle-sensor-spi-support-sc60228dc/1682/22 "2022-02-15T21:33:23Z")

</div>

> [@aokholm](#):
>
> On a side note… Do you think this encoder will be able control a 50 pole stepper?

I doubt it. If you search this forum, other users have had trouble with the high pole count steppers even when using 14bit sensors, and this one is only 12bit.

I think this sensor will be suitable for lower pole-pair motors, maybe up to 11PP or so?

---

_[View the full topic](https://community.simplefoc.com/t/angle-sensor-spi-support-sc60228dc/1682)._