# A2212/13t BLDC motor and problems

**URL:** https://community.simplefoc.com/t/a2212-13t-bldc-motor-and-problems/74
**Category:** hardware support
**Created:** [August 19, 2020, 7:04pm UTC](https://community.simplefoc.com/t/a2212-13t-bldc-motor-and-problems/74 "2020-08-19T19:04:50Z")
**Posts on this page:** 1
**Showing post:** 13

<div class="post-metadata">

### Author: ![Sok](https://community.simplefoc.com/user_avatar/community.simplefoc.com/sok/32/133_2.png) [@Sok](https://community.simplefoc.com/u/Sok)
#### Post date: [August 23, 2020, 9:30am UTC](https://community.simplefoc.com/t/a2212-13t-bldc-motor-and-problems/74/13 "2020-08-23T09:30:10Z")

</div>

I tried to change wires, it didnt help.

I just had experiments with find\_pole\_pairs sketch. When i run it, motor should rotate slowly. Instead of this im getting moves from left to the right. It means my board making wrong signal and somewhere i made a mistake while soldering this.

---

_[View the full topic](https://community.simplefoc.com/t/a2212-13t-bldc-motor-and-problems/74)._