# 3x BTS7960 design for BLDC

**URL:** https://community.simplefoc.com/t/3x-bts7960-design-for-bldc/2387
**Category:** hardware support
**Tags:** bts7960
**Created:** [August 22, 2022, 12:23pm UTC](https://community.simplefoc.com/t/3x-bts7960-design-for-bldc/2387 "2022-08-22T12:23:36Z")
**Posts on this page:** 1
**Showing post:** 8

<div class="post-metadata">

### Author: ![Yurgen](https://community.simplefoc.com/user_avatar/community.simplefoc.com/yurgen/32/3499_2.png) [@Yurgen](https://community.simplefoc.com/u/Yurgen)
#### Post date: [August 23, 2022, 1:24pm UTC](https://community.simplefoc.com/t/3x-bts7960-design-for-bldc/2387/8 "2022-08-23T13:24:08Z")

</div>

Im trying to make a simple driver like this

> [@Infineon bldc shields impressions](https://community.simplefoc.com/t/infineon-bldc-shields-impressions/417/14):
>
> @Antun_Skuric Using btn7960 or btn8982 three half bridge chip to make a simple driver board.Using single chip processor esp32 to brush simplefoc can open-loop control.There’s no test, but it looks good! You can try it! [Using btn7960 or btn8982 three half bridge chip to make a simple driver board.](https://www.youtube.com/watch?v=RTnTL_MhKVU) Before I drew 2 Allegro, using 5010 motor, a little hot, current sound is very big, no test! However, the current within 10 a motor should be good! …

 ![image](https://community.simplefoc.com/uploads/default/original/2X/9/9dc3cf18e49200609c2c3dcae5131d723285e475.jpeg)

---

_[View the full topic](https://community.simplefoc.com/t/3x-bts7960-design-for-bldc/2387)._